Chapter 108: Naraku Forges "Dakkon" & Beggar-Version Uchiha Gunbai – A- Grade Weapons, Madara's Failed Theft, and Final S-Grade Push
Forging "Dakkon" differed from conventional Teigu—after all, it wasn't from the same world.
Naraku directly took out the battlefield broken blades collected by Mifune, along with fine iron and Orihalcon steel.
Naraku used clones to melt the metals above. Although the original was just forged from ordinary broken blades, Naraku added some extra materials to enhance the new blade's overall attributes.
Naraku's main body went to his usual hidden corner and directly summoned [Golden Dragonman].
The Dragonman's body was covered in hard green dragon scales, limbs thick and powerful, head somewhat resembling a Western dragon. Left hand held a shield, right hand an axe.
"ROAR!"
As soon as it appeared, the Dragonman roared at the sky, as if announcing its arrival to the ninja world.
But before the Dragonman could carefully observe this world, Naraku had already finished forming hand seals.
"Wood Release: Great Forest Technique!"
Dense trees surged relentlessly toward the Dragonman, wrapping around it.
Only then did the Dragonman notice the living human before it. It swung its battle axe, chopping through some trees, and smugly declared: "Exorcist! This can't trap Lord Dragonman! Watch me break out and chop you into pieces, then devour you bite by bite!"
But before it could continue trash-talking, it was completely bound by the dense trees.
It was just about to use its unmatched power to break free when it suddenly realized these damned trees were slowly devouring its power, leaving it completely unable to escape.
Only now did it panic and try to beg for mercy.
Naraku had no time for chit-chat with forging material. He directly controlled wood to gag its mouth, then used "Incursio" to open a wound in its chest and extract its vital scale.
He also used small saplings to remove its Dragon Scale Shield.
This shield was no ordinary item—normally made from ordinary dragon scales shed by Dragonmen, it could absorb demonic power released by enemies and convert it into stored energy.
It could also directly release the stored energy.
Of course, the Dragon Scale Shield wasn't invincible—it had a capacity limit.
The moment Naraku saw this Dragon Scale Shield, he felt it was perfect material for forging an Uchiha gunbai.
Afterward Naraku used the Dimensional Array to return to the forging room. By this time his clones had already melted all the previous materials into one. Naraku used the exclusive secret technique of "Dakkon" to perfectly fuse the dragon scales into the blade.
Then, employing his own version of the乱披风锤法 (Chaotic Cloak Hammering), he hammered ding-ding-dang-dang until a demon blade with ink-green dragon scales along the spine appeared.
Naraku teleported back to the Dragonman's location.
"Pfft!" — in one thrust he plunged the demon blade into the Dragonman's body. Before the Dragonman could even scream properly, it was completely devoured by the demon blade and turned to ashes.
Only now did this demon blade officially finish forging.
Ding...
[Congratulations to the forger for creating A- grade weapon "Dakkon"!]
Naraku immediately checked the attributes.
[Dakkon: A- grade weapon. This blade uses the classic forging method of demon blades from the Inuyasha world, combining Dragonman, broken blade resentment, and other precious materials such as fine iron and Orihalcon steel. Blade length 1.9 meters, single-edged, spine wrapped in dragon scales. Possesses "sturdy," "tough," and "devour" traits, with strong chakra conduction ability. Skills:
Evolution: Can grow stronger by devouring enemy bodies or energy. Higher quality yields greater improvement!
The blade's owner can directly use the Dragonman power within the demon blade, but while using this power the user becomes prone to control by the blade—turning bloodthirsty and undergoing Dragonman transformation.
Devour: Can directly absorb attribute attacks from enemies and re-release them. Absorbed energy has a certain upper limit.
Transfer: If a weapon cuts this blade, the resentment within dies completely and the blade's power transfers to the new weapon.
Momentum Kill: Can perceive nodes in the enemy's momentum and cut through them to reduce the enemy's momentum. Debuff:
Damage Transfer: If the owner is controlled by Dakkon, Dakkon will transfer unbearable attack damage to the owner.]
After reading the blade's attributes, Naraku could only say: truly worthy of a demon blade—evil to the core, especially that one-handed damage transfer skill.
Naraku was seeing this for the first time.
But this weapon also had the advantages of a demon blade: very low requirements for its owner—even a person without chakra could use this demon blade.
Moreover, Naraku always felt this blade was meant to be sent to the protagonist as a power-up buff. In the Inuyasha anime, Inuyasha accidentally cut Dakkon, then evolved Tessaiga into Dragon-Scaled Tessaiga.
This form of Tessaiga possessed Dakkon's devouring ability and could cut through enemies' demonic points.
Since this was the ninja world, it became Momentum Kill.
Naraku decided to throw this demon blade directly onto the battlefield later—let it grow stronger nonstop on the battlefield.
Finally, an "Incursio"-type weapon would completely devour this demon blade!
Afterward Naraku took out the Dragon Scale Shield. Actually this was already a finished weapon—further forging into a new weapon wouldn't improve it much.
But after all, Naraku had promised old man Uchiha Min, so he'd make an Uchiha gunbai.
He could also use it to show off himself.
Naraku still took out fine iron and Orihalcon steel. Considering the fan's function would be relatively single-purpose, he also added "Scarlet Monkey Iron Sand" and "Scarlet Monkey Ore."
Later, with several clones cooperating, he quickly forged a beggar-version Uchiha gunbai.
Ding...
[Congratulations to the forger for creating A- grade weapon Uchiha Gunbai (Beggar Version)!]
[Uchiha Gunbai (Beggar Version): A- grade weapon. This fan uses partial Teigu forging techniques, combining Dragon Scale Shield, fine iron, Orihalcon steel, "Scarlet Monkey Iron Sand," "Scarlet Monkey Ore," and other precious materials. Fan length 1.5 meters, engraved with the Uchiha clan emblem, edges slightly sharpened. Possesses "sturdy" and "tough" traits, with strong chakra conduction ability. Skills:
Rebound: Can directly absorb attribute attacks from enemies and re-release them. Absorbed energy has a certain upper limit. Exceeding the limit causes immediate shattering. Effect greatly enhanced when used with Uchiha Reflection.
Reinforcement of single-attribute chakra attacks.]
Naraku then directly took the Uchiha gunbai to find the old man and—with an Uchiha-specialized gunbai-tossing pose—threw the fan to Uchiha Min.
Uchiha Min touched his nonexistent sweat on his forehead—the gunbai Naraku just threw nearly sliced his head off.
Before he could get angry, Naraku explained the beggar-version Uchiha gunbai's functions.
Afterward Naraku directly left the room. He was planning the next phase of work.
Right now the materials on his hands were almost used up. He planned to set aside all miscellaneous matters and focus fully on forging an S-grade weapon to complete the system upgrade!
--------------------------
Support us on Patreon and gain access to 100 chapters in advance!
patreon.com/inkshield
Special Offer: Badass Tier – 20% OFF
Use code: STAR20